Steel Billet Specifications:
|Type||Steel billet / Square steel/ Steel square bar|
3SP/PS, 5SP/PS, Q195, Q235,
Q255, Q275, 20MnSi etc.
|Technique||Hot rolled, Continuous casting and rolling|
|Size||50*30mm ~ 160*160mm|
|Packing||Loose packing, in bundle|
|Payment terms||T/T, L/C at sight, Usance L/C|
|Trade terms||EXW, FOB, CFR, CIF|
|Trans terms||FIO, FILO, FLT|
|Inspection||Third party inspection accepted|
|Delivery time||15-30 days, according to the quantity|
carbon structural steel, wire rod, rod, deformed bars,
profile steel, machine parts, and steel moulds etc .
Customized service is available
(for sizes,length and chemical components etc.).
|Steel Grade||C %||Mn %||Si %||S %||P %|
|Q195||0.06-0.12||0.25-0.50||0.30 Max||0.04 Max.||0.04 Max.|
|Q235||0.12-0.22||0.30-0.60||0.30 Max.||0.04 Max.||0.04 Max.|
|Q255||0.18-0.28||0.40-0.70||0.30 Max.||0.045 Max.||0.050 Max.|
|Q275||0.27-0.38||0.50-0.80||0.30 Max.||0.045 Max.||0.045 Max.|
|3SP||0.14-0.22||0.40-0.85||0.15-0.30||0.050 Max.||0.040 Max.|
|5SP||0.28-0.37||0.50-1.00||0.15-0.30||0.050 Max.||0.040 Max.|
|20MnSi||0.17-0.25||1.00-1.60||0.40-0.80||0.050 Max.||0.050 Max.|
1. The material of our billet is Q345B, which is similar to A572,
GR 50, please refer to the attached comparison document.
2. Our billet is very straight and The surface of our billet is
3. We customize radius of the angle to be 3mm, which is most
suitable for rail wheel to run.
4. The both end side of this billet was cut by Sawing machine which
is very easy for assemble.